Robomart 32 Channel Servo Motor USB UART Controller & Wireless PS2 Controller

This is servo controller board with 32 channel. Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication ( TTL serial port ) of MCU ( 51, AVR, ARM, FPGA, PIC, etc.) to send commands to control the steering.You can also download instructions to the servo motor controller for offline operation.Wireless device compatible, it can also being set by the program we provided.-- More powerful MCU-- Higher controlling accuracy-- Offline operation function-- Identify baud rate automaticallyFeature:1. Controlling MCU power supply: 6.5~12 V or 3.5~5.5V. 2. Servos power supply: DC (depends on the motors, generally 5V DC)3. Control channels: 32. 4. Communication Input: USB or UART (TTL or USART). (The Bluetooth or some other wireless module can be used to do the controlling)5. Signal Output: PWM (Accuracy 1us).6. Servo motor resolution: 1us, 0.09 degrees.7. Baud Rate: 9600,19200,28400,57600,115200,128000(recognized automatically)8. Servo motors supported: Futaba, Hitec or some other Servos Motor controlled by PWM.9. Dimensions: 63.5mm x 43.5mm x 1.6mm.10. Control mode: USB and UART (TTL) to accept command. (Comes with USB data wire and PC controlling software**)11. Flash: onboard 512K ROM12. Dimension : 63.5mm x 43.5mm x 1.6mm Usage:1. Open wireless receiver, solder with 7 dupont line according to the order of the picture showed.2. Connect 7 dupont line with the main board according to the order shown.3. Set up all buttons?s instructions of PS2 controller via computer software.